Tier One Partners’ pre-terminated fiber trunk solutions and jumpers provide your data center with an economical way to install a large number of fibers in a small diameter footprint. The pre-terminated fiber assemblies are available in a number of connector termination configurations and are fully customizable with regard to individual breakout lengths, overall lengths and jacket style, including armor. Fiber counts of 2, 6, 12, 24, 48, 72, 96 and 144 both Single Mode and Multi Mode (62.5, 50 micron and 10gig Aqua OM3 and OM4 for 10/40/100 Gig solutions) Plenum, riser including armor. All connector types supported – LC, mini LC, MU, , MTP, SC, ST, FC, MTRJ. For high performance computing infrastructures, our Partner, EIS, can support your needs for Infiniband physical layer solutions.
- Custom lengths and breakouts
- Custom configurations
- Armor fiber available
- Single Mode and Multi Mode
- Riser and Plenum available
- Heat cured epoxy and ceramic ferrules used
- Every cable has a unique serial number
- 100% tested and recorded
- Pulling eyes available
- Reels available on longer lengths
Jumpers
We have patchcords in either single-mode or multi-mode. Our patchcords are available in the most popular connector combinations and are available in custom lengths. All assembled using reliable and durable ceramic ferrules, you can choose between PC, UPC, and APC polish finishes. Most cable assembly styles are available as either simplex or duplex. Multimode cords are available in either OM3 or OM4 – 50/125 or 62.5 versions.
- Custom lengths
- LC, Uniboot LC, MU, SC, ST
- Custom configurations
- Armor fiber available
- Single Mode and Multi Mode
- Riser and Plenum available
- Heat cured epoxy and ceramic ferrules used
- Every cable has a unique serial number
- 100% tested and recorded
- Reels available on longer lengths
Harnesses
Our Harness Cable offering allows for simplified breakout of the MTP trunk cable for both single-mode and multi-mode. Simply decide what break out length works best for your application (an EIS specialist can help you with this decision based on what machine you will be connecting), the correct input connector, and if required, your desired labeling information.
- Single-mode and multi-mode configurations available
- Male and female MTP connectors available in 4, 8, 12 and 24 fiber varieties
- Custom lengths
- Custom labeling
- Every cable is serialized for traceability
- Factory terminated, 100% visually and optically tested
- Optical data is recorded and available upon request
Trunks
EIS has the fiber trunks for the data center either singlemode or multimode trunks from 6 fiber to 144 fiber in armor. The EIS trunks are available in the most popular connector combinations and are available in custom overall lengths and breakouts. All trunks use reliable and durable ceramic ferrules, you can choose between PC, UPC, and APC polish finishes. Multimode cords are available in either OM3 or OM4 – 50/125 or 62.5/125 versions and can be built to support 10/40/100G transmission rates.
- Custom lengths and breakouts
- Custom configurations
- Armor fiber available
- Single-mode and multi-mode
- Riser and Plenum available
- Heat cured epoxy and ceramic ferrules used
- Every cable has a unique serial number
- 100% tested and recorded
- Pulling eyes available
- Reels available on longer lengths
10/40/100G Solutions
The Data center of today and tomorrow require a plan for their migration path from 10G to 40G or 100G and beyond. There are many solutions to accommodate these speeds for managing and building a data center migration strategy. One that fits your needs and at a price point that makes sense for your organization.
The basis for the EIS solution is a 24 fiber trunk solution and a combination of multi fiber harnesses, patch cables, patch panels and in some cases cassettes. The options vary based on the overall distance and loss budget constraints as outlined in the industry standards. The solutions provided by EIS will provide data center management with a standards based fiber infrastructure that will evolve with their active equipment migration. An efficient, flexible and cost effective solution will aid in the following benefits:
- Lower TCO
- No cassettes (Reduced structured cabling costs)
- Significantly fewer pieces and parts
- Significant reduction in dB Loss
- Simplified installation
- Easy upgrade path for follow on installs
- Reduction in rack space
- Utilization of readily available cabling
- Ability to reduce patch cables
- Reutilize patching solutions on other projects
- Eco friendly
Patch Panels
Tier One Partners offers a complete line of flat panels and rack mounted enclosures. The flat panels are ideal for data center applications and can be utilized in any standard 19 inch rack or cabinet. The panels range from 1U to 12U and can support LC, MU, MTP, SC, and ST. Port count ranges from 24 channels in 1U up to 288 ports in an 8U space or 386 in 10U. In addition the 1U flat panels can be mounted vertically in our replicator configuration model to provide for a mirror image of your existing switch face. This allows users to easily make changes to the network cabling without touching the switches.
Flat Panels
- Easy access to patch cord releases
- Custom port labeling (numeric and hexadecimal)
- Constructed 16 gauge steel/powder coated
- Mount in standard 19” cabinet
Replicator Panels
- Custom configuration to meet any switch port count
- Full access with both vertical and horizontal formatting
- LC, MU and MTP couplers
- Migration strategy for 10/40/100G patching solutions
Enclosed patching solutions are available in 1U, 2U and 4U. They are designed for easy installation in racks and in telecom closets. Adapter plates, LC, LC quad, MTP and cassettes are offered allowing for flexible connection solutions.
Enclosures
- Smoked glass front covers
- Multiple adapter plates and cassette options
- Constructed of 16 gauge steel/powder coated
- Rear enclosure to hold slack and fiber breakouts
- Optional cable management and accessories available
Specialty Panels
Cabinet MTP mounting brackets
EIS utilizes the cabinet mounting brackets to reduce horizontal rack space and allows for MTP coupling of trunks and equipment specific harnesses. This provides data centers with low loss dense cost effective panel solutions.
- Universal mounting to standard racks
- Allows from 2 to 12 port couplers
- Flexible routing and configurations
Cassettes
EIS offers a complete line of cassettes for plug and play infrastructure solutions. All in a standard footprint designed to be used with EIS enclosures. Designed for 6 to 12 channels per adapter plate and up to 144 channels in a 4U footprint.
- Pre-terminated fiber in a factory setting
- Single-mode and multi-mode (OM3 & 4)
- Easy installation
- Low loss
- 100% factory tested and documentation
